Resource Person : DR.S.D.Venkatrajmohan,Professor Civil Engineering & Dr.Ait, Bangalore
Date : 30th October 2017
Time : 11.45 am to 12 .45pm
Venue : Civil Seminar Hall
Archives
Technical Talk on Construction Planning Management
Resource Person : Mr.Sandesh Naik, MD & CEO, Expertise
Date : 2nd November 2017
Time : 10.45 am to 12.45 pm
Venue : Civil Seminar Hall,RRCE
Target Participants : UG students (5th & 7th semester)
Outcome of the Program :
- This Seminar was aimed to bridge the gap of industry requirement and the syllabus.
- The prefinal year students were given the basic idea of construction management which is a part of the course in the next semester and thereby providing them with the necessary introduction.
- The aim of the seminar was to mainly highlight the practical knowledge or the practical skills.
Technical Talk on Real Estate Project Proposal Clearance Guide Lines
Resource Person : DR.C.Sharma, Professor Civil Engineering,RRCE, Bangalore
Date : 28th October 2017
Time : 11.45 am to 12 .45pm
Venue : Civil Seminar Hall
Technical Seminar – Construction Management Training for Civil Engineering Students-Need and Opportunities
Resource Person : Mr.Sriram, Founder and MD, Prayojana Construction Management and Training Institute
Date : 23rd October 2017
Time : 10.45 am to 12.45 pm
Venue : Civil Seminar Hall,RRCE
Target Participants : UG students(5th & 7th semester)
Outcome of the Program :
- This Seminar was aimed to bridge the gap of industry requirement and the syllabus.
- This training institute highlighted the internship opputunities and training programmes available inclusively for final year students.
- The aim of the seminar was to mainly highlight the practical knowledge or the skills expected in the field by the final year students.
- The prefinal year students were given the basic idea of construction management which is a part of the course in the next semester and thereby providing them with the necessary introduction.
Career Guidance Program on Higher Studies Abroad
Resource Person : Mr.Ravi and Mr.Badvi, Edwise Overseas Education Consultants, Bengaluru.
Date : 24th October 2017
Time : 9.00 am to 10.00 am
Venue : 7th Semester class room, RRCE
Invitation For : 7th Semester ISE Students
Target Participants : 7th Semester ISE Students
Outcome of the Program :
- Informing the students on slow down in the IT industry
- Sensitize the students about the importance of Global education to build a carrier.
- Selection of Universities abroad.
- Sensitize students on Admission formalities.
- Guidance in VISA Processing
- Procedure for Bank Loan.
Four Days workshop on Non Destructive Test (NDT)
Resource Person : 1) Mr.Sudarsha S Iyengar ,MD (Civil Aid)
2) Dr.Bhavanishankar S (Faculty Civil Engineering)
3) Mr.Rajaram B N(CADD centre Head)
4) Mr.Naveen(CADD centre)
Date : 31st October to 3rd November 2017
Awards/ Achievements : Certificate For Participation
Venue : Civil Seminar Hall, RRCE
Invitation For : HOD-Civil, Faculty of Civil-UVCE,
Target Participants : 5th & 7th semester UG students of Civil Engineering department
Outcome of the Program :
- Students were given hands on experience to use the NDT equipments like rebound hammer, ultrasonic pulse velocity.
- It aimed at reaching out the final year students so that they will have knowledge of the practical usage of the instruments.
- Students learned to test the strength of concrete structural elements like beams and columns with the rebound hammers.
5 days hands on workshop on total station
Resource Person : Mr.Bharath, 7 crafts group (E surveying)
Date : 31st Oct – 4th Nov 2017
Venue : Civil Seminar Hall, RRCE,CADD lab
Invitation For : CSE Seminar Hall
Target Participants : 5th semester UG students
Outcome of the Program :
- Students were able to understand the basics of total station usage.
- Students had hands on experience of total station usage in the field.
- They were able to work with the advanced technology in surveying which is the part of university curriculum.
- They were taught to transfer the data and use the E- surveying software.
Expert Talk on Wide Area Measurement Systems(WAMS)
Resource Person : Mr. M.M. Babu Narayanan, SMIEEE,Chief Technical Advisor,Power Research & Development Consultants (P) Ltd., Bengaluru
Date : 28th October 2017
Time : 10:30 AM
Venue : CSE Seminar Hall
About the Programme:
The program was commenced with the thoughts of almighty of GOD. Dr. R. Balakrishna, Principal RRCE (Chairman of the Program) welcomed the Guest Mr. M.M. Babu Narayanan, Chief Technical Advisor, PRDC, Bengaluru with bouquet of flowers. Dr. M. Arunachalam, Prof. & HoD of EEE (Student Branch Counselor) welcomed the gathering and mentioned the importance of being a IEEE member and encouraged the students. Dr. R. Balakrishna, Principal of RRCE addressed the gathering and gave the importance of reference of IEEE journals/ publications to the students. The presence of Dr. T. R. Gopalakrishnan Nair, Rector, RRGI graced throughout the function. Prof. Sincy Elezebeth Kuruvilla, Asst. Prof. Dept. of EEE (Student Branch Chair) presented the brief bio-data of the Guest Mr. M.M. Babu Narayanan and gave an overview of the topic“Wide Area Measurement Systems (WAMS)” to the gathering.
The speaker, Mr. M.M. Babu Narayanan delivered an expert talk on “Wide Area Measurement Systems (WAMS)”. He discussed about the present and emerging challenges in large power networks and the relevance of WAMS in secure operation of power systems. The discussion covered WAMS components, applications in protection and control and comparison between SCADA where the magnitude of voltage and currents at different point in the system is made available where as in WAMS, these signals with phase positions are available to take necessary corrective actions and avoids blackouts. He has discussed about ongoing Indian URTDSM project in detail also. The session was very interactive and the knowledge shared by the speaker uplifted our students to a level forward.
The expert was felicitated with mementos by IEEE PES Bangalore Chapter and Management of Rajarajeswari College of Engg., Bengaluru. The program was concluded with the Vote of Thanks by Prof. Bharathi V , Asst. Prof. Dept .of EEE (IEEE Student Member). She thanked the dignitaries for gracing the occasion with their valuable presence. She extended her gratitude to IEEE PES Bangalore Chapter & Dr. Manohar Singh, Engg. Officer, CPRI for coordinating to arrange this program She also thanked Honorable management for their co-operation, all HoDs, Office Bearers of RRCE- Student Branch of the IEEE and all faculty and students.
Invited Talk on Counting Principles and its Applications
Resource Person : Prof. Kallur V Vijayakumar, BMSIT, Bangalore, Karnataka
Date : 25th September 2017
Time : 10:30 AM – 12:30 PM
Number of students registered : 150
About the Programme:
A Invited talk was arranged on 25/09/2017 with the Topic “Counting Principles and its Applications” by Prof. Kallur V Vijayakumar, BMSIT, Bangalore, Karnataka, India. The talk was purely arranged for Computer Science & Enginnering students, which is related to their curriculum of their present syllabus. Totally 150 students were attended the talk from 10:30 AM – 12:30 PM
Guest Lecture on Application of Fourier Transforms
Resource Person : Dr. A Venkatesh, Professor and Dean, Presidency University Bangalore Karnataka
Date : 7th September 2017
Time : 1:30 PM – 3:30 PM
Number of students registered : 130
About the Programme:
A guest lecture was conducted on 07/09/2017 with the topic “Application of Fourier Transforms ” by Dr. A Venkatesh, Professor and Dean, Presidency University Bangalore Karnataka, India.The lecture was purely arranged for Electrical and Electronics students, which is related to their core subjects. Totally 130 students were attended the guest lecture from 1:30 PM – 3:30 PM
FDP – Outcome Based Pedagogic Principles for Effective Teaching (NPTEL)
Association of EEE in collaboration with RRCE- Student Branch of the IEEE conducts Webinar on Outcome Based Pedagogic Principles for Effective Teaching (NPTEL) (A faculty development program – FDP).
Resource Person : Dr. S K Das Mandal- Asst professor, IIT Kharagpur
Dr. Tamali Bhattacharyya- Project manager, IIT Kharagpur
Date : 19th and 21st October 2017
Venue : EEE Seminar Hall
Technical Talk on IPR Awareness
Resource Person : Mr.Himatej Reddy and Mr.Sathyajith D.R, Jackfruit Software and Systems Pvt Ltd
Date : 7th October 2017
Time : 1.30 p.m.
Venue : EEE Seminar Hall
About the Programme:
A Technical talk on “ IPR Awareness” was held at EEE seminar hall on 7thOctober2017.The event was organized by the EEE department association of Electrical & Electronics Engineering “TRANSFORMERZ”.The occasion was graced by more than 50 students.
The program was hosted by Anusha, our 5th sem student.The program started with an invocation song and was followed by welcome address to the dignitaries.The following dignitaries were on Dias
Dr. T.R. Gopalakrishna Nair Rector, RRGI
Prof.Dr. M .Arunachalam HOD of EEE, RRCE
Prof. Dr. M.Arunachalam, HOD, Dept of EEE welcomed the resource persons and addressed the students about the importance of Patenting the projects and Industrial Automation on Embedded Systems.Dr. T.R. Gopalakrishna Nair,Rector, RRGI explained about the present scenario of Industrial Automation.
Technical Talk on Embedded System and Industrial Automation
Resource Person : Mr.Shivashankar and Ms.Ranjitha, Prolific systems and Technologies pvt ltd
Date : 7th October 2017
Time : 1.30 p.m.
Venue : EEE Seminar Hall
About the Programme:
A Technical talk on “Embedded system and Industrial Automation” was held at EEE seminar hall on 7thOctober2017.The event was organized by the EEE department association of Electrical & Electronics Engineering “TRANSFORMERZ”.Theoccasion was graced by more than 50 students.
The program was hosted by Anusha, our 5th sem student.The program started with an invocation song and was followed by welcome address to the dignitaries.The following dignitaries were on Dias
Dr. T.R. GopalakrishnaNair Rector, RRGI
Prof.Dr. M .Arunachalam HODof EEE, RRCE
Prof. Dr. M.Arunachalam, HOD, Dept of EEE welcomed the resource persons and addressed the students about the importance of Patenting the projects and Industrial Automation on Embedded Systems.Dr. T.R. Gopalakrishna Nair,Rector, RRGI explained about the present scenario of Industrial Automation.
Technical Talk – Bridging the gap between Industry and Civil Engineering Curriculum
Resource Person : Mr.Ajit Sabnis, President Association of Consulting Civil Engineers(India)
Date : 25th September 2017
Time : 10.45 am to 12.45 pm
Venue : Dr.A.P.J.Abdul Kalam Conference Hall ,RRCE
Target Participants : UG students(3rd ,5th & 7th semester)
Outcome of the Program :
- Students were highlighted on the industrial requirements of an engineer.
- The speaker highlighted the Student chapter in ACCE(I) which aims at skill development of undergraduate students as per Construction Industry requirement.
- Information regarding Students Chapter , Life membership details and the courses offered for undergraduate students.
Technical Talk – Concepts of Water Proofing
Resource Person : Mr.Chaitanya P,BASF India Pvt Ltd
Date : 11th October 2017
Time : 11.45 am to 12.45 pm
Venue : Dr.A.P.J.Abdul Kalam Conference Hall ,RRCE
Target Participants : UG students(5th & 7th semester)
Outcome of the Program :
- Students were highlighted on the concepts ,requirements and execution of water proofing in practical.
- They were taught the different types of water proofing techniques.
- As the university syllabus is lagging in providing the necessary information on water proofing concepts ,the talk gave a clear idea of its practical significance.
Engineeria-International level quiz Competition
Date : 7th October 2017
Organised by : CADD centre training services PvtLtd,Chennai
Conducted by : CADD centre training services Pvt Ltd,Basveshwaranagar ,Bangalore
Target Participants : UG students (3rd ,5th & 7th Semester )
Outcome of the Program :
- The competition was conducted based on general aptitude for the 1st round and top 2 students will be selected for the round 2.
- The round 2 competition will be based on the engineering facts. The total marks scored by the students in bith the rounds will be considered for the award of scholarship .
- The students were exposed to different softwares in the field of Civil engineereing and the utility of these softwares in the industry.
Workshop on Advances in Communication Networks using Network Simulator 3
AICTE Sponsored One Week Hands-on Workshop on “Advances in Communication Networks using Network Simulator 3” on 11th – 16th December, 2017.
Industrial Visit to ISRO Satellite Centre
Dept. of Information Science and Engineering Organizing Industrial Visit to ISRO SATELLITE CENTRE, Bangalore on 9th October 2017.
Resource Person : Mr. Srinivas, Scientist
Date : 9th October 2017
Venue : ISRO Satellite Centre, Bangalore – 17
Target Participants : 2nd year UG Students
Faculty Accompanied : Mr. Dinesh kumar, Mrs. Ashwini R MaliPatil, Ms. Chaithra S
Industry visit coordinator : Ms. Rajeshwari S
Outcome of the Program :
- Gained Knowledge of Clean room of Satellite.
- To differentiate between PSLV and GSLV.
- Gained Knowledge of application of remote sensing in agriculture, weather monitoring, Disaster Recovery etc.
- Gained knowledge about TV Broadcast mechanism with the help of demo model.
- Gained knowledge about different Satellites.
Oracle Training
Department of CSE is conducting an Oracle training on 23,24 October 2017.
Resource Person : Mr. Naveen J, Oracle Certified Trainer, Christ University, Bangalore.
Date : 23,24 October 2017
Target Participants : 5th sem UG students of CSE department
Number of Audience : 110
Outcome of the Program :
The outcome of the program was to make the students work with Basic SQL queries, Triggers, joins, views and cursors.
Congrats to Hitesh Vardhan Raju.S
RRCE NSS Volunteer participated in National& State Level NSS Pre – Republic Day Camp 2017-2018 at University of Agricultural Sciences, GKVK, Bengaluru on 6th to 7th Oct 2017.
Expert Lecture on Industry Expectations from a Fresh Engineering Graduate
Resource Person : Dr.N.Guruprasad, Professor, New Horizon College of Engineering, Bangalore – 560103
Date : 25th September 2017
Time : 10:45 AM TO 1:15 PM
Venue : ECE Seminar Hall, RRCE
Invitation For : 5th and 7th Semester ISE Students
Target Participants : 5th and 7th Semester ISE Students
Outcome of the Program :
- Provide Knowledge and information on current trends in IT industry
- Know the importance of Technical skills such as programming and data structures
- Acquire knowledge to become industry ready
- Enhance the confidence of the student by giving tips to improve the presentation and communication skills.
- Motivated the students to improve your soft skills for an interview like Dress code, Hair Grooming, Sitting posture, mannerism etc.
Seminar – Project Review
Resource Person : Final year MCA students
Date : 25th July 2017
Venue : MCA seminar Hall
Target Participants : Pre final year students
About the Programme:
final year students explained their project work to their juniors also shared their internship experience with pre final year students.
Higher Education Career Guidance Programme
Resource Person : Dr. R Krishna
Date : 7th July 2017
Venue : MCA seminar Hall
Target Participants : Undergraduate students
About the Programme:
The session started with different PG programs advantages. Department is organize the higher education career guidance program to help the society to focus on suitable higher education and career also providing certification courses
Engineer’s Day & Teacher’s Day Celebrations 2017
We cordially invite you for the Engineer’s Day & Teacher’s Day Celebrations 2017 On 15th September 2017
Date : 15th September 2017
Time : 3:30 PM
Venue : APJ Abdul Kalam Hall
Calender of Event for ECE – 2017-18(Odd Semester)
NSS- Voluntary Blood Donation Camp
RRCE NSS Unit Organizing 5th Voluntary Blood Donation Camp on 21st Sep 2017 at RRCE Campus.
About the Programme:
A 5th Voluntary Blood Donation Camp was organized at the RajaRajeswari College of Engineering, through National Service Scheme Unit Headed by Mr. K S Ananda Kumar, NSS Programme Officer on 21-09-2017 wherein Lions Club of Bangalore South along with the Red Cross blood bank, RRMCH Blood Bank, Narayana Hrudayalaya Blood Bank, BGS Global Hospitals Blood Bank, Sushrutha Blood Bank, have participated. As many as 650 students and faculty have participated in 5th Voluntary Blood Donation Camp. 178 units of blood are collected in the campaign.
Guest Lecture on Discrete Mathematical Structure
Resource Person : Mr. Kallur V Vijayakumar, BMSIT, Bangalore
Date : 25th September 2017
Venue : CSE Seminar Hall
Number of Audience : UG Second year students of CSE department, 145 Students
Outcome of Event :
The outcome of the workshop was to bring out the advanced concept of discrete mathematical Structure.
Chairman’s Trophy – Cricket Tournament
Chairman’s Trophy – Cricket Tournament on 16th September 2017, 10.00 am at ACS Engineering College ground
The Roadmap to achieve a Rewarding I.T Career On your OWN
Resource Person : Mr. Ravindra K,Founder & Developer of Ekalavya Universys,Bangalore – 560055.
Date : 5th September 2017
Time : 10:45 AM – 1:15 PM
Venue : ISE Lecture Hall, RRCE
Invitation For : 5th & 7th Semester ISE Students
Target Participants : UG students of all related Engineering fields are invited to participate.
Organiser of the Event : Mr.Dineshkumar, Assistant Professor, ISE dept.
Outcome of the Programme:
- Provide Enormous Knowledge about Programming Skills
- Transforming Engineering Students to I .T Industry
- Conducted SAT(self assessment test) to evaluate the students
- Achieving the international certification and evolve as the Industry ready Programmer
One day workshop – Introduction to Internet of Things
Resource Person : Md. Hafeez ur Rehaman
Date : 31st August 2017
Venue : IoT Centre
Target Participants : Pre final year students of MCA department
Topics Covered :
The session started introduction to IOT, its history and general architecture and applications and examples where IOT can be deployed.
The introduction to Arduino board its various pins is given.
General programming structure on Arduino IDE and data types and some of the basic functions used are explained
A Hands session using Arduino was conducted in afternoon which covered the following experiments:
- Blinking a LED using both digital and analog write to Arduino I/O
- Reading of analog and digital values from sensor using Arduino
- Measuring temperature and humidity using DHT11
- Working with TSOP to control brightness of LED
- Using ultrasonic sensor with Arduino.
KSCST selected projects..Congrats!!!!
Project exhibition conducted by KSCST on 11th and 12th Aug 2017 at NMAM Institute of technology Nitte, Udupi.
Karnataka State council for science and technology (KSCST), IISc, Bangalore had called for engineering project proposal under 40th series Student Project Program(SPP) and our college had applied 37 projects for fund. Out of 37 projects 6 projects were supported with grants as shown below
Educational Outreach Program
Department of CSE is organizing an Educational outreach Program in Government School, Ramohalli on 9th September 2017
Resource Person : Teaching staff, Non-teaching staff and students of CSE Department
Date : 09th September 2017
Time : 09:30 AM – 01:30 PM
Venue : The Government School, Ramohalli
Target Participants : 52 Students(7th and 8th standard)
Outcome of the Program:
The outcome of the programme was to create awareness among students about basic computer hardware and its functionality and educate them basic word processes and power point presentation skills using MS Office application.
3 Days Workshop on Advanced Networking Concepts
Resource Person : Mr. Prasanna, Chief Technical Mentor – Livewire, Bengaluru.
Date : 30th August – 01st September, 2017
Time : 09:00 AM – 04:00 PM
Venue : CSE Lab 4
Target Audience: To know about the Networking technologies while providing them with an opportunity to improve their Packet Tracing & Spoofing.
Number of Audience : 15 Students
About the Programme:
This workshop provided hands-on Advanced networking Concepts, taught by an experienced technical trainer, using a live in-Lab network. Students learned about cabling, network protocols (including a close-up look at TCP/IP), network devices like hubs, switches, routers, firewalls, repeaters, gateways, and more. Students will learn how to create a secure network and avoid common network security mistakes. This hands-on Advanced networking fundamentals training workshop had got students up to speed with practical tools and techniques that they can put to use right away to make their network run faster and more securely with fewer problems.
3 Days Workshop on Android Applications
Resource Person : Mr.Sridharsrivin, Chief Training Mentor – Sudocode Academy, Bengaluru.
Date : 30th August – 01st September, 2017
Time : 09:00 AM – 04:00 PM
Venue : CSE Internet Center
Workshop Objective :
Target Audience : To develop applications on Android technologies while providing them with an opportunity to improve their codingwriting skills (Java & xml).
Number of Audience : 15 Students
About the Programme:
Android App Development Workshop, hands-on program trained students how to Design and Develop Android App using Android open-source platform.
Training program taught the philosophy of developing android through its main application development building blocks and their interaction with one another. By the end of the program each student was able to build their own android application incorporating most of the key aspects of the Android platform. Also they have taught necessary Android specific knowledge and skills according to industry standards to become a specialist Android application developer.
Two Days Symposium TRANSFORMERZ
Date : 03rd & 4th November 2017
Career Guidance on Job Opportunity in PLC & IOT
Resource Person : Mr.Ramesh, Director,Technofly solutions, Bangalore & Mr. Anees, Texas Instruments, Bangalore
Date : 26th October 2017
Time : 1.30 P.M to 4:00 PM
Venue : EEE Seminar Hall
Target Participants : 5th Sem & 7th students of Electrical and Electronics Engineering.
Total number of Participants : 56
Outcome of the Program :
- Both the resource person said PLC & IOT are having plenty of job opportunity, however students should prepare them self to improve their skill in that aspect.
- Technofly solutions, have agreed to accept students for internship .In internship, students will get opportunity to practice programmes (coding) in PLC related applications. The exercise may lead to projects. This will improve their skill and in their placements.
- Edgate Technology are collaborated with Texas Instruments (TI) and will provide internships to our students. They will conduct on-line test like open book test (Description will be available to select the answers).Based on students performance, they may decide the internship content. The student choice on date of taking up the online tests is to be intimated to Edgate Technology.
Technical Talk by Alumni
Topic : Expected Programming Skills of EEE freshers by IT Companies
Resource Person : Our Alumni Ms.Pooja, Technical Engineer, HP Pvt Ltd
Date : 21st October 2017
Industrial Visit to Shivana samudra Hydro Power Plant
Date : 16th October 2017
Target Participants : 3rd Semester Students
Workshop on Post Demonetisation and its role on the economy
Business Quiz
Date : 24th October 2017
Guest lecture on the effect of GST on common man
Resource Person : Prof.Santosh
Date : 05th October 2017
Seminar on Role of Social media in marketing
Resource Person : Dr.K.Karunakaran
Date : 26th September 2017
Seminar on Start up in India: Glimpse of relevant laws & Regulations
Resource Person : Mr.Sripadu
Date : 20th September 2017
Technical Talk on Computer Networking – Trends and Opportunities
Resource Person : Prof.M.Gomathy Nayagam, Assistant Professor, CSE Department, Mount Zion College of Engineering & Technology. Pudukottai, Trichy,
Date : 4th November 2017
Time : 10.00 am to 4.00 pm
Venue : ISE- Seminar Hall, RRCE
Invitation For : 7th Sem and 5th Sem ISE Students
Target Participants : 7th Sem and 5th Sem ISE Students
Outcome of the Program :
- Basics of Computer Networks.
- CCNA Essentials and Basics.
- Preparation Tips for CCNA Exam.
- Benefits of Network Administration and Network Security certifications
- Job opportunities in Networking in Industries
Parent Teacher Meeting – II
Date : 21st October 2017
Technical Talk on VoIP (Voice over IP) & Unified Communication
Resource Person : Mr.Guruprasad PS, British Telecom Pvt Ltd, Bangalore
Date : 23rd September 2017
Time : 10:30 AM TO 12:45 PM
Venue : ISE Seminar Hall, RRCE
Invitation For : 3rd 5th & 7th Semester ISE Students
Target Participants : UG students of all related Engineering fields are invited to participate.
Organiser of the Event : Neha Singhal, Assistant Professor, ISE dept.
Co-Organiser of the Event : Ashwini R Mali Patil, Assistant Professor, ISE dept.
Outcome of the Program :
- Provide Enormous Knowledge about VoIP
- Transforming Engineering Students to I .T Industry
- Real time examples of VoIP & SIP Protocol
- Concepts of unified communication
Online Zero-based & Single Window Training
Resource Person : Ravindra K, Founder & Developer, Ekalavya Universys, Bangalore
Date : 30th August 2017
Venue : CSE Seminar Hall
Target Participants : UG Final and Third year students of CSE department
Outcome of the program/workshop:
The outcome of the seminar was to bring out the awareness about career sure, is a finishing placement training program, designed for transforming students and graduates as IT industry ready programmers by importing the necessary employability and enables them to choose a rewarding I.T career of their choice.
Workshop on Python Programming for Embedded Design
Resource Person : Dr. Soven K dana, Professor Dept of ECE,RRCE ,Bangalore
Date : 30th,31st August and 1st September,2017
Venue : Satyendranath Bose Seminar Hall, Dept.of ECE,RRCE
Workshop Objective :
Objective of the workshop is to introduce python programming using python interpreter .Python is a multi-paradigm programming language which supports object oriented programming and structured programming. Python program is one of the important things that embedded designed has to learn for various reasons. The students will be enabled to do projects in embedded system domain with python interpreter and open hardware boards without bothering about licensing.
Target Participants : 7th Semester students of ECE are invited to participate.
Number of students registered : 75
Outcome of the Program :
- The 7th semester students gained awareness on python programming using python interpreter.
- They were also given awareness on what core industries going with reference object oriented programming and structured programming
- Hands on sessions were conducted using python programming language and Students were able to write simple programs.
- They could also do few projects based on Arduino boards.
- In future the students will be enabled to do projects using python interpreter and open hardware boards without bothering about licensing.
Workshop on Learn Electronics and Do your own Projects
Date : 18th,19th and 21st August 2017
Venue : : Satyendranath Bose Seminar Hall, Dept.of ECE,RRCE
Workshop Objective :
Objective of the workshop is to give awareness on the trends and activity happening in the field of Electronics and communication. This workshop is intended to trigger curiosity and generate interest in doing hands on work and projects relevant to their subjects every semester and get tuned to the requirements of industry.
Target Participants : 3rd Semester students of ECE are invited to participate
Number of students registered : 115
Outcome of the workshop :
- The 3rd semester students gained awareness on Electronic Circuits, trends in industry, industries involved in product design, VLSI, Communication, Telecommunication etc.
- They were also given awareness on what core industries going with reference to ODM and OEM, and development and R & D sector.
- Hands on sessions using discrete components and PCB. Projects ideas were generated and feasibility was discussed.
- Students are also enabled to use open hardware boards such as Arduino.
- During the project execution they also gained knowledge on the schematics, selection etc.
- They could also do few projects based on Arduino boards.
Expert talks and Symposium
Date : April 2018
National Level Conference
Date : March 2018
Workshop
Date : 3rd Week of October 2017
Industrial Visit – Sansera Engineering Private Limited
Date : October 2017
Training the Trainers – Hypermesh,ANSYS-Work Bench,CATIA
Date : September 2017
Industrial Visit – Electroplast Private Limited
Date : September 2017
Faculty Development Program
Date : 1st Week of September 2017
Recent Advancements in Mech-Engg
Date : 1st Week September 2017
Industrial Visit – Britannia Industries Limited
Resource Person : Mr. Prashant Engineer
Date : 30th August 2017, Wednesday
Venue : Bidadi Industrial Area, Ramnagar District.
Target Participants : 7th Semester Students
Number of Students : 60
Outcome of the Program :
Students gained the knowledge and able to understand the following:
- Products of the company.
- Processing of products from raw materials to final product.
- Raw materials manufactures & suppliers.
- Latest machinery set up & Equipments.
- Good manufacturing practices.
One day Conference – Innovative Construction in Civil
Resource Person : Dr.Ramachandra Head, Ultratech Cement
Date : 15th November 2017
Technical Talk on Remote Sensing and Geographic Information System
Resource Person : Dr GaneshRai , RRSC Bangalore
Date : 03rd November 2017
Time : 11.45 am to 12 .45pm
Venue : Civil Seminar Hall
Technical Seminar – Concrete 2025
Resource Person : Nagesha Puttaswamy, Ultratech
Date : 26th October 2017
Technical Seminar – Employment Opportunities
Resource Person : Association of consulting Civil Engineers
Date : 11th October 2017
Technical Talk – Advances in Water Quality Testing
Resource Person : Shivkumar KPCB
Date : 07th October 2017
Technical Talk – Advanced Surveying
Resource Person : D.L.Madhukar (L&T)
Date : 23rd September 2017
Capgemini on Campus Drive – 2018 Batch @ RRCE
Dear All,
M/s. Capgemini Team is visiting RajaRajeswari College of Engineering to conduct 2018 – ON Campus Drive on Monday, 11th September 2017 at 8:00 am
|
Details |
Description |
|
Company Name |
M/s. |
|
Hiring Batch |
2018 only |
|
Branches |
ISE , CSE, EEE, ECE, TELECOM only |
|
% Eligibility |
|
|
Job Title |
Graduate Trainee Engineer |
|
Drive Date |
|
|
Venue |
|
|
Eligibility to attend Campus drive |
|
|
Please Carry |
2 Resumes ; All the Marks Cards ; 2 copies of passport |
|
Process |
|
|
Special Note |
Note for Students:
|
8th Graduation day on 06th September 2017
We have great pleasure in informing you that the Eighth Graduation Day of RRCE will be held on 06th September 2017. We are extremely happy to invite and extend a warm welcome to you to this auspicious occasion. Prof Y S Rajan –former chairman ISRO has kindly consented to be the Chief Guest and deliver the Graduation Day address.
We would like to inform you that you have to confirm your participation by filling up your details below.
Please note that those who have arrear(s) are not eligible for the award of degree on the Graduation Day.
We would like to inform that you have to confirm your participation by registering in the college website on or before August 30, 2017.
View Graduation Day Invitation
Faculty Development Program on Embedded Design using High End Processor
Date : 29th-31st July and 1st August 2017.
Place : Sathyendranath Bose Seminar Hall, Dept of ECE,RRCE
Workshop Objective : The objective of this FDP is to make the faculty comfortable dealing with high end processor such as ARM Cortex-32 and MSB-430 etc .The FDP is organized in such a way faculty get the understanding of processor/controller architecture in detail. The usage of the processor needs to understanding of assembly instructions, modes of operations and higher level language such as python to write higher applications. Faculties were given awareness on guiding, developing and documenting projects in right way.
Total number of participants : 26
Outcome of the Programme:
- Most of the resource persons are from industry with vast relevant experience, so their sessions benefited the faculty in understanding the concepts clearly and the industry perspective of Embedded system design and development
- Participants have gain knowledge about how industry working with silicon development fabrication, original device manufacturing and original equipment manufacturing and marketing with some examples such as Samsung, Intel, PCB design etc.
- Participants have gained the knowledge on writing programs using python.
Industrial Visit to DD Chandana
Dept. of Computer Science and Engineering Organizing Industrial Visit to DD Chandana, Bangalore on 11th October 2017.
Resource Person : Mr. Rammohan
Date : 11th October 2017
Venue : DoorDarshan Kendra, J. C. Nagar, Bangalore – 17
Target Participants : 2nd year UG Students
Faculty Accompanied : Mr. Mohammed Hafeezur Rehaman and Ms. Vandana B
Industry visit coordinator : Ms. Vandana B
Outcome of the Program :
- Gained Knowledge of Transmission Technology.
- Gained knowledge about Studios, Recording Procedure, Lighting techniques.
- To differentiate between Live Program Telecast and Recorded Program Telecast.
- Gained knowledge about Multiplexing, Demultiplexing and Storage Technologies
- Gained knowledge about Satellite Transmissions.
Industrial Visit to ISRO
Dept. of Computer Science and Engineering Organizing Industrial Visit to ISRO SATELLITE CENTRE, Bangalore on 6th October 2017.
Resource Person : Mr. Srinivas, Scientist
Date : 6th October 2017
Venue : ISRO Satellite Centre, Bangalore – 17
Target Participants : Final year UG Students
Faculty Accompanied : Dr. Lokesh N.S, Mrs. Devi T, Mr. Prabaharan J, Ms. Tulasi
Industry visit coordinator : Ms. Vandana B
Outcome of the Program :
- Gained Knowledge of application of remote sensing in agriculture, weather monitoring, Disaster Recovery etc.
- To differentiate between PSLV and GSLV.
- Gained knowledge about TV Broadcast mechanism with the help of demo model.
- Gained knowledge about different Satellites.
Mini Project Exhibition
Resource Person : Mr Zyed Alam Khan, Operation Analyst, Epsilon Ltd,
K Vyshnavi, Associate Enginner, Paytm, Bengaluru
Date : 12th October 2017
Venue : CSE Department Lobby
Topics Covered :
- Sensor Based Projects.
- IOT based projects
- Embedded system oriented projects
- Embedded ‘C’ Based Projects
Target Audience : CSE Dept students
Number of Projects Participated : 25 Batches & 76 Students
Outcome of the Program :
Mini project expo was organized and coordinated by the Dept. of CSE giving an opportunity for the students to exhibit their technical intellect and creativity. “Scrambling Algorithm and LPG Auto Booking” were the highlights of the expo. The projects involved embedded based models of IOT such as Traffic Simulator, solar power, water supply for irrigation and many more using sensors. “MINI PROJECT EXPO-2k17” was informative and a grand success.
Inauguration of 1st Year BE Classes for Academic year 2017-18
The inaugural function of BE 1st year students – 2017-18 was celebrated at ACS Convention Hall of RRMCH on 11-8-2017 at 10 AM. Sri K Sreenivasa Ramanujam, Academic Relationship Manager, Tata Consultancy Services, Karnataka was the Chief Guest while, Dr. S. Vijayanand, Executive Director, Sri C.N. Seetharam, Chief Executive Officer, Dr. Gopala Krishna Nair, Rector, Sri S Jeyabalan, Special Officer, RRGI were present. The new batch of students were accompanied by their parents who were excited & happy to see their children entering a new phase of life.
Date : 11th August 2017
Time : 10.00 AM
Place : ACS Convention Hall,RRMCH
Technical Aptitude Training Program
Name of event : Technical Training on C & C++.
Resource Person : Mr. Karthik & Mr. Chandrashekar trainer from NIIT, Bangalore.
Date : 11th October 2017
Venue : CSE Seminar Hall
Number of Audience : UG Second year students of CSE department, 145 Students
Outcome of the Program :
The outcome of the program was to bring out the advanced concept of C , C++ and Database Concepts
Awareness on Higher Education (GATE, GRE, IAS)
Resource Person : Mr. Sarvendu Mishra Sr. Faculty from TIME Group
Date : 29th August 2017
Time : 09:30 AM – 03:30 PM
Venue : CSE Seminar Hall
About the Programme:
Adverting to the above, we would like to bring this matter for your kind information that our Computer Science and Engineering department had organized a seminar on Awareness on Higher Education (GATE, GRE, IAS…) held on 29th August 2017.
The awareness aimed at providing a common platform for students to gain knowledge on acquiring higher education after their graduation in Computer Science and Technology.
Mr. Sarvendu Mishra Sr. Faculty from TIME Group delivered a talk on “Awareness on Higher Education in India and Abroad”.
Seminar was opened for 7th & 5th Semester students of CSE. Around 110 students attended and were motivated.
We thank the management for their Constant and continuous encouragement, the Principal for providing valuable directions and support in time.
3 Days Student Development Programme on JAVA/J2EE and CLOUD Applications
Resource Person : Mr. Ashok Kumar, IBM India, Bangalore
Date : 30th August – 01st September, 2017
Time : 09:00 AM – 04:00 PM
Venue : CSE Lab 2
Target Audience : UG Final year students of CSE department, 45 Students
Number of Audience : 15 Students
About the Programme:
The outcome of the workshop was to bring out the hands on experience of Java and J2EE Programming
Trigger 2K17 National Level Technical Symposium
Date : 22 September 2017
Last Date for Submission of Paper : 15th September 2017
Intimation of Papers : 18th September 2017
Submit your Papers at : papers@trigger2k17.com
IISC Extension Lecture Program – Technical Seminar on Multimedia Communication
Resource Person : Prof. Anandi Giridharan, IISc(Extension Lecture program), Bangalore.
Date : 27th September 2017
Time : 10:00 AM
Venue : CSE Seminar Hall
Number of Audience : UG Third year students of CSE department, 105 Students
Outcome of the Program :The outcome of the workshop was to bring out the advanced concept of Multimedia Communications.
Faculty Development Program on Advanced Networking
Resource Person : Mr. Prasanna, Technical Head, Livewire,Bangalore
Date : 1st August 2017 to 5th August 2017
Duration : 5 Days
Venue : CSE Seminar Hall
Target Audience :
To know about the Networking technologies while providing them with an opportunity to improve their Packet Tracing & Spoofing.
Number of Audience : 50 Faculties
Outcome of Event :
The objectives are to provide the faculty with an understanding of network engineering and digital networks. The learning outcomes include being able to identify what forms a network and how devices on the digital network communicate.
Faculty capabilities upon completion of the program include an understanding of techniques for information transmission between devices found on a digital network, an understanding of the types of devices found on a digital network and the principles for control of a digital network
The program outcomes include an introduction to the concepts of connection and connection-less information transmission over a digital network and the use of real time systems and services.
Opportunities at HDFC Career life Insurance
Date : 26th May 2017
Fees Structure for Academic Year 2017-18
Capricot POOL CAMPUS DRIVE – 2017 BATCH
International Yoga day
Resource Person : Dr. R Maruthi Ram
Date : 21st June 2017
Time : 10 AM
Venue: Old CSE Lab, Ground Floor
About the Programme:
It is a matter of joy and privilege that June 21st is celebrated as “International Day of Yoga” propagating the glory of ancient Indian wisdom jointly proclaimed by leading Yoga Institutions. To commemorate the same, Rajarajeswari College of Engineering observed “International Day of Yoga” at Seminar Hall on 21.06.2017 wherein faculty, students and staff have participated.
At the outset, Prof. Preethi A Nayak, RRCE Yoga Coordinator welcome Dr.R Maruthi Ram, Prof. & HoD, MBA Department, Dayananda Sagar Academy of Technology & Management, who is also the Yoga guru @ Yogashree Yoga Centre, Bangalore, the Resource Person for the event.
Prof. Dr. K Pavan Kumar HoD, MBA department read out the profile of the guest and requested him to stress on the importance of Yoga and its demonstration.
In his address, Dr. R Maruthi Ram explained that application of Yoga is to bring health, harmony and peace which will highlight the beneficial effects of Yoga in the field of health, concentration and stress management. The students and faculties have practiced and performed various Asanas and Pranayama, demonstrated by Mr. Shiva Kumar, who assisted the Guru.
At the outset, the audience were very much delighted to know the importance of yoga in the day today life.
The faculty members have rendered positive response by providing feedback on their learning and they promised that they would take up Yoga sessions on a continuous basis and make their lives wholesome.
Prof. K Pavan Kumar thank the Yoga Guru and his team for giving demonstration and illustration on Yoga. The International Yoga Day celebration was concluded with vote of thanks by the Chair.
International Conference on Sustainable Engineering and Technology (IconSET 2018)
RRCE in association with ACSCE conducting an International Conference IconSET 2018 on 19,20 April 2018.
Venue : ACS College of Engineering
|
Important Dates: |
Registration: |
|
Last date : 01st Dec., 2017 Acceptance : 10th Jan. , 2018 Final Paper: 30th Jan., 2018 Registration : 05th April , 2018 |
R&D/Industries :Rs 6000/- Academia : Rs 5000/- Student :Rs 3000/- International :USD 400/- Int. Students USD 200/- |
Heritage Day Celebration
RajaRajeswari College of Engineering organized Heritage day celebration on 06th May 2015 at APJ Abdul Kalam conference hall. This auspicious function was inaugurated with lighting the prosperous and traditional lamp by the distinct hands of the Principal Dr. Balakrishna R,Vice Principal Prof. Prabhakar, Dr. Gopalakrishna Nair, Rector and the convener of the program Dr. Savitha B
Welcomed the dignitaries, faculties & Students for the function by Dr. Savitha B, Department of Mathematics and it followed by the Principal talk briefed about the importance of celebration of heritage day and the Vice-Principal in his speech appreciated the effort & involvement made by the students on Heritage Exhibition. He Stressed upon that this cultural heritage not only bean did of club event but if should continuously be celebrated. He gave the difference between the old and new generations and how to follow this culture in our daily life by giving respect to our parents and elders. Then the Rector Dr. Gopalakrishna Nair briefed about the knowledge of heritage in Engineering stream and finally congratulated the heritage committee for conducting this function successfully thanked all.
Then Prof. Shwetha, Asst. Professor, Department of Computer Science and Engineering concluded with vote of thanks.
After this formal function, stage events conducted, in that Folk dance, folk singing, Heritage fashion show and speech on Heritage day. Students are participated very enthusiastically and outside the conference hall Mechanical I year students conducted exhibition with the theme ‘Heritage Games’ like Choukabara, chinni-dandu, lagori, Buguri, Chaduranga, Pagade etc. They display playthings with explanation in charts. Electronics I year students exhibited the culture of south states life styles, in that Karnataka, Thamil Nadu and Andra Pradesh are the major places. Along with this ‘Heritage Food Court’ also conducted in that five departments are participated viz., EEE, ISE,CSE,ECE & Civil Engg. Finally the event was very gracefully concluded.
Technical talk on Introduction to Python programming
Date : 26th April 2017
Venue : Aryabhatta Seminar Hall,RRCE
About the Programme:
A Journal club talk on “Integrating wind energy to grid” and a Technical talk on “Introduction to Python programming” was held at Aryabhatta seminar hall on 26th April 2017.The event was organized by the EEE department association of Electrical & Electronics Engineering “TRANSFORMERZ”. The occasion was graced by more than 100 students.
The program was hosted by Pooja.N.P, our 8th sem student. The program started with an invocation song and was followed by welcome address to the dignitaries. The following dignitaries were on Dias
Dr. T.R. GopalakrishnaNair Rector, RRGI
Prof.Dr. M .Arunachalam HOD of EEE, RRCE
Prof. Dr. M.Arunachalam, HOD, Dept of EEE welcomed the resource persons and addressed the students about the importance of renewable energy resources. He also explained the necessity of using solar energy as an alternate source of energy. Dr. T.R. Gopalakrishna Nair, Rector, RRGI explained about the present scenario of renewable energy resources in the world.
Then session was continued by Prof Bharathi.V on “Integrating wind energy to grid” .She discussed about
• Wind energy as an efficient and alternate source of energy
• How to integrate wind power to grid
• Present Indian wind power scenario
• Environmental challenges and sound issues
• Advantages and disadvantages
• Future scope
Then the session was continued by Technical talk on “Introduction to Python programming” by Prof K.R.Pavan Kumar. He explained about
• System computational concept
• Program computer servers
• Different computer and algorithm steps
• Python programming proceedings
• Operands and commands of Python language
• Comparison of C Programming and Python Programming
Student Project Exhibition
Department of Information Science and Engineering organizing the “Students Project Exhibition” on 22nd May 2017.
Date : 22nd May 2017
Time : 10.00 AM – 3.00 PM
Venue : ISE Lobby (2nd Floor, RRCE)
About the Programme:
PROJECT EXHIBITION was organized by the Department of Information science and Engineering,on 22nd May, 2017. Final yearstudents are participation of this exhibition.
Major objective of organizing this exhibition was to provide the platform and unleash the potential of the students by showcasing their innovative projects developed in the Final Year either as Industry Defined Problem or User Defined Problem and provide an opportunity for the students to demonstrate their learning experience.
The outcome of the PROJECT EXHIBITION was that students were able to show their project at higher level and the process boosted their confidence.
The inaugural of the project exhibition witnessed the presence of Dr.Balakrishan R, principal, RRCE, along with the faculty and staff members of Department of ISE, RRCE
Prof. Ananda Kumar K S, HOD, ISE Department formally welcomed the principal of RRCE,
Dr. Balakrishan R, principal, RRCE, in his motivational address emphasized on the importance of learning new technologies and tools for the students.
Prof. Prabhakar M, Vice principal, RRCE,shared his valuable knowledge among the students highlighting the importance of project making.
Technical Talk on Digital Design and Prototyping-Market trends and challenges
Resource Person : Mr. Rajendra & Mrs. Lavanya,Veda Technologies
Date : 11th April 2017
Venue : Dr.A.P.J.Abdul Kalam Conference Hall
Target Participants : 2nd year (4th sem) and 3rd year(6th Sem) of civil department
Outcome of the Technical talk :
- Students can fetch the knowledge on digital prototyping
- Awareness of application of various software’s used for digital prototyping
- Students will have an idea to plan their career as per the market requirements
- Students are given the knowledge of market oppurtunities and the challenges
iBridge Offline Aptitude Test – 2017 Batch @ RRCE
Dear All,
M/s. iBridge team is visiting RajaRajeswari College of Engineering to conduct offline Aptitude Test on Monday, 15th May 2017 at 9:00 am
|
Details |
Description |
|
Company Name |
iBridge (a part of Neorem services Pvt. Ltd.) – |
|
Hiring Batch |
2017 |
|
Eligibility |
Mechanical, CSE/ISE, EEE ,Civil, ECE – preferably 55% & |
|
Drive Date |
|
|
Venue |
|
|
Recruitment Process |
First Round: Aptitude Test. |
The students will be selected based on percentile in Aptitude Test and their names & branches will be intimated to the Placement Department. Once this will be done, there’ll be specific training (chargeable) for four days. Out of it, the Technical Training will be conducted before actual interview to take place. This training is purely based on requirement of our clients and hence very specific in nature. Successful students will get offer letter and unsuccessful students will get other interview opportunities and the complete support which will last for one year from the date of registration without any extra charge.
Specific Training: Suppose, Mechanical Engineering students are looking for Production related jobs, they’ll be trained on specific questions related to production
The Test can be conducted now and is completely free. We got huge success for placing students in core industries from various colleges across Bangalore. No BPO jobs and the full Client List is available in our Website.
Note: There will be NO charge if the students get ‘Offer Letter’ or ‘Joining Letter.’
IBM Pool Campus Drive – 2017 Batch @ RRCE
Dear All,
M/s. Collabera is visiting RajaRajeswari College of Engineering to conduct Pool Campus Drive for M/s. IBM on Tuesday, 16th May 2017 at 9:00 am
|
Details |
Description |
|
Company Name |
IBM (through Collabera) |
|
Hiring Batch |
2017 only |
|
Branches |
EEE/ECE – (Testing, Mainframes, Oracle) |
|
Eligibility |
|
|
CTC offered |
2L to 2.4 LPA |
|
Job Title |
Software Developer – Across India |
|
Drive Date |
|
|
Venue |
|
|
Technical Skills |
C, Java, .Net, PHP. ; Analyzing Information, General |
|
Please Carry |
Resume ; All the Marks Cards ; 2 copies of passport photo ; |
|
Process |
Group Discussion/JAM ; Online Test ; Training ; Final IBM |
|
Job Profile |
Determines operational feasibility by evaluating analysis, |
Note: Short listed students need to undergo Primary online Test after completing their exams & whoever clears the test need to undergo training for 50 – 70 Days in Bangalore.
Project Exhibition
Department of CSE organizing Project Exhibition on 31-05-2017.
Resource Person : Prof RajaRajeswari, Dr Lokesh
Date : 31/05/2017
Time : 9:30 AM
Venue : CSE Project Lab
Target Participants : UG 8th sem students of CSE department
Outcome of the program/workshop :
Through this our students demonstrated their projects to the invited guests and also to the different invitees. Finally, guests selected two projects and they are awarded as “Best Project”.
Skill Development Programme on Hotline maintenance of transmission line and switchyards
5 days skill development programme on “Hotline maintenance 0f transmission line and switchyards” by National Power Training Institute(NPTI) (Ministry of Power, GOI)
Date : 15/05/17 to 19/05/17
Inauguration: 9:00 a.m on 15/05/17
Venue : Aryabhatta Seminar Hall,RRCE
ALL ARE CORDIALLY INVITED
Industrial Visit
Resource Person : C. Kashinathan, Plant incharge,T.K.Halli
Date : 27th & 28th April 2017
Venue : Bangalore water supply and sewerage board, T.K.Halli. Kanakpura
Participants : 3rd year (6th semester A & B) of civil department
Outcome of industrial visit :
- Students obtained practical knowledge of different stages in treating the drinking water
- Students were able to understand the design of treatment plant to treat 550MLD of water.
- Students had hands on experience of all the operations and method of dosing to treat the water for drinking purpose.
- All the matainance works related to filter media was practically observed.
National Conference on VLSI, Communication & Signal Processing(NCVCS-2017)
Department of ECE conducting National Conference on “VLSI, Communication & Signal Processing” (NCVCS-2017) will be held on 16th & 17th May 2017. Calling the papers from UG/PG students, Research Scholars, Academicians, Industry Personal for publishing their work.
Resource Person : Dr. S V Subramanya, Ex-Vice-President, Infosys, Professor, IIITB, Bangalore
Keynote Speaker : Mr. Mallikarjun Reddy N, Project Delivery Manager, Wipro Technologies, Bangalore
Date : 16th -17th ,May 2017
Venue : Dr. A.P. J. Abdul Kalam Hall,RRCE,Bengaluru
Objective of the Conference :
The primary objective of NCVCS-2017 is to establish an effective platform for Institutions and Industries to share ideas and to present the works of Scientists, Engineers, Academicians and Research Scholars in the fields of VLSI design, Communication Technologies and Signal Processing.
Technical Sponsor : ISTE,IETE
Number of papers received : 94
Number of papers accepted : 67
Number of publishing Journal : International Journal IJARIIE (ISSN 2395-4396)
Number of Sessions held : 8
About conference flow:
National Conference started with the inaugural function 10am on 16th May 2017, with all the dignitaries and the keynote speaker. After the inaugural function, NCVCS-17 chief guest Dr. S V Subramanya, gave talk on applications of advanced technologies. The keynote speaker Mr. Mallikarjun Reddy N, was delivered on the topic “cloud and open source adaption in industry”, regarding cloud computing, how to use open source in industry and academics. After the inauguration followed by tea break, morning sessions started in parallel. Post lunch afternoon session started and second day (17th May 2017) morning sessions started in parallel. Post lunch afternoon session started followed by Valedictory, in which the Best paper awards and certificates for participants were distributed.
IEEE Students Branch Inaugural Function
Chief Guest : Padmashri Dr.R.M. Vasagam ,IEEE Life Senior Member, IE(I) Council Member & Chairman, Aerospace Engg. Board
Guest of Honor : Ms. Divya MG,CDCA , Excom Member,IEEE Bangalore Chapter, Co-C, Membership Development
Date : 10th May 2017
Time : 10:00 am to 11:10 am
Venue : Dr. A.P. J. Abdul Kalam Hall, RRCE, Bengaluru
Industrial Visit to Tata Consultancy Services Limited (TCS)
Dept. of ISE Organizing Industrial Visit to Tata Consultancy Services Limited (TCS), Bangalore on 18th May 2017.
Resource Person : Mr. Sreenivasa Ramanujam, Academic Relationship Manager, Karnataka & Mr. Bighnaraj Panigrahi
Date : 18/05/2017
Venue : TCS, White Field Road, Global Axis H Block Building, Bangalore – 66
Target Participants : 2nd year UG Students
Faculty Accompanied : Mr.Ananda Kumar, Mrs. Neha singhal, Mrs.Ashwini M Patil
Industry visit coordinator : Ms. Rajeshwari S
Outcome of the program/workshop :
- Gained Knowledge about how to fill the gap between industry and Academic.
- Gained Knowledge about how to face interview
- Gained Knowledge about latest research topics in TCS.
- The main objective behind the visit was to make student aware about how an Software company works, Services available, Job Opportunities, Information Resource Center (IRC) Function.
Industrial Visit – ACE Designers Ltd
Resource Person : Mr. Amul Chandra
Date : 18th April 2017
Venue : ACE Designers Ltd, Plot No. 7 & 8, 2nd Phase, Peenya Industrial Area , Bangalore.
Target Participants : 6th Semester ME 1
Number of students registered : 35
Faculty coordinators : Asst.Prof. Mr.Dharshan .S.K
Asst.Prof. Mr. Shivliangaiah.K
Outcome of the program/workshop :
Students discussed the following with engineer about
- CNC Turning machines
- High precision & high technology CNC Turning machines
- Special CNC Turning/Boring machines
- Gantry robot operated turning
- Tooled up CNC Turning machines
Technical Talk – Remote sensing and GIS
Resource Person : Dr.H.S.Govardhana Swamy, Prof and HOD Civil department
Date : 11th April 2017
Time : 10.45 am to 12.45 pm
Venue : Aryabhatta Seminar Hall,RRCE
Target Participants : 4th Semester Students (A and B section)
Outcome of the program/workshop :
- Students were introduced to the basic concepts of remote sensing .
- Students were able to understand the application of remote sensing in civil Engineering field
- The concepts of geo information system and the application of GIS in civil engineering field was highlighted.
Industrial Visit – RDC Concrete (India) Pvt Ltd
Resource Person : Suhas Jain, Plant Incharge, RDC concrete (India) Pvt Ltd
Date : 18th April 2017
Venue : RDC concrete (India) Pvt Ltd, Kumbalgodu, Bangalore
Target Participants : 2nd year (4th semester ) of civil department
Outcome of the program/workshop :
- Students had a hands on experience of the grading and mixing of concrete at a concrete mixer plant.
- They were exposed to all the operations of the equipments in a concrete mixer plant.
- Students were highlighted with all the insitu tests conducted on specimens.
Industrial Visit to ISRO
Dept. of Information Science and Engineering Organizing Industrial Visit to ISRO SATELLITE CENTRE, Bangalore on 5th May 2017.
Resource Person : Mr. Srinivasa, Scientist
Date : 05th May 2017
Venue : ISRO Satellite Centre, Bangalore – 17
Target Participants : 3rd year UG Students.
Faculty Accompanied : Ms. Rajeshwari S, Mr.Prasad A Y, Mrs. Vinutha H
Industry visit Coordinator : Ms. Rajeshwari S
Outcome of the Program:
- Gained Knowledge of Clean room of Satellite.
- Gained Knowledge of Satellite launch through video clip.
- Gained Knowledge of application of remote sensing in agriculture, weather monitoring, Disaster Recovery etc.
- To differentiate between PSLV and GSLV.
- Gained knowledge about TV Broadcast mechanism with the help of demo model.
- Gained knowledge about different Satellites.
National Conference on Emerging Trends in Applied Sciences ETAS-17
The conference will be held on 17th & 18th May 2017 at Seminar Hall, RRCE, Bengaluru.
About the Programme:
Division of applied Science at Rajarajeswari College of Engineering organized a two-day National Conference on EMERGING TRENDS IN APPLIED SCIENCES (ETAS-17) on 17th
and 18th May 2017. Welcome address was given by Dr. N Sathyan, HOD, Physics. Chief guest was introduced by Dr. GS Prasad, HOD, Maths. Inauguration was conducted at APJ Abdul
Kalam seminar hall with Chief Guest Dr. K Suguna, Prof. and HOD, MBU, IISc, Bangalore.
Chief guest briefly explained the observation of Science over 300 years. Inauguration was graced by our Rector Dr. TR Gopalakrishnan Nair, Principal Dr. R Balakrishna, Vice-Principal Prof.
Prabhakar M, Faculties of RRCE along with delegates from various parts of India and our students. Vote of thanks for inauguration was given by Dr. Razia Tasneem, HOD, Chemistry.
Department of Physics conducted the National Conference at Aryabhatta Seminar hall on 17th afternoon and 18th full day. More delegates were attended. 17th afternoon was graced by Dr. M
Baskar about molecular dynamics and Dr. Sujith KV about E-waste. 18th guest speakers were Dr.John Kiran about Raman Spectroscopy, Dr. V Prakash about Radiation and Dr. KN Ravi about
the Moon. Delegates were happily shared their experience through the oral and poster presentations. RRCE Student participation was amazing like invocation, anchoring, hospitality to
chief guest and the activities of the conference. The aim of National Conference ETAS-17 was fully achieved by the release of CD also. Dr. Jobish Johns convener from physics department of
ETAS-17 was involved in all the activities of the National Conference. Mrs. Vindhya A and Mrs. Vaishali R Bote supported the activities of ETAS-17.
Two Days National Level Symposium – Electro Blitz Season 2
Date : 17th and 18th April, 2017
Venue : APJ Abdul Kalam Hall ,RRCE, Bengaluru
Target Participants : UG/PG students of all related Engineering fields are invited to participate.
Outcome of the symposium :
- The symposium included many of the technical events participated by good number of students.
- This is helped the students in showing their strength in technical aspects. The technical events such as paper presentation, project exhibition, mesh scrutinize, coding and circuit debugging were included to prove their technical competence and competitiveness.
- The nontechnical events such as Treasure hunt(lost), Pen talks, Mad money, Media mazed, Hey Mr. Sherlock were challenging to students and created lot of vibrancies .
- This event is organized, participated and planned by the students and they got to learn lot of organizing, fund generation, accounts, event coordination etc.
- The students exhibited their talent through show models built with electronics. This is added colors to the whole event.
- The most of the models were reusable having wonderful ideas of event, coordination and management.
