Event Duration : Two days 19th – 20th September 2016
Venue : Incubation Center ,RRCE, Bengaluru
Resource Person : Mr. Harish Dayalan is an Embedded Developer and also alumini of department of electronics & communication engineering, RRCE. He has good experience of doing different types of projects such as home automation, Robos etc
Workshop Objective :
The student will gain knowledge of designing using embedded hardware. The students will improve programming skills in Embedded C and gain knowledge in circuit connections and designing, testing and debugging. The student develops a capacity to programme any type of microcontroller and working of different sensors and the objective is to make a movable project.
Target Participants : UG students of all related Engineering fields are invited to participate.
Outcome of the workshop :
Students have learned programming in Embedded C and tried variations in each program excise.
The Sensors such as gas sensors ,PAIR ,Ultrasonic were used to do the experiments such as
contents of Carbon Monoxide in the environment, motion detection and distance estimated
using Ultrasonic Sensor.
The experiments included LED and LCD displays for different programs.
Uncontrolled Robo was built in the second session and tested for movement in different direction with variations in distance.
Self balanced obstacle Robo was built, tested and run successfully.
The students were actively involved and expressed their satisfaction about learning and organization of the workshop.
Professor Guru Subramanyam the Chair of Electrical and Computer Science & Engineering of Kettering School of Engineering University of Dayton visited the RRCE and ACS college of Engineering in the first week of September 2016. Prof. Guru a leading educationalist and expert in Micro Electronics and Communications is a well-known Principal investigator in a variety of high end Technology projects and a leading collaborator in the domain of ECE . He visited RRCE in the beginning and gave an excellent presentation on the Engineering capabilities on Electrical school . While in his address to the HoDs of the Departments of RRCE along with leding faculties he emphasized the collaborative mode of Education prevailing in Dayton and its relevance. Later he interacted with the faculties and answered the question. He also paid a visit to important laboratories of RRCE. The principal RRCE, HoD of CSE and Physics had detailed discussions with him on various aspects of Education and Technology. He was introduced to the forum by the Rector, Rajarajeshwari Group of Institutions.
Technical Hands on Session on JAVA & J2EE
Technical Hands on Session on JAVA & J2EE
Department of CSE is organizing an practical hands on session for 4th Year Students by NIIT, Bengaluru.
Resource Person : Mr. Karthik M N & Mr. Umesh Chandra
Date : 16th & 17th September 2016
Time: 9:00 am
Venue : CSE Project Lab
Target Participants : UG Final year students of CSE department
Outcome of the program/workshop :
The outcome of the workshop was to bring out the hands on experience of Java and C++ Programming.
Technical Seminar on Data Structures and its Applications
Technical Seminar on Data Structures and its Applications
Department of CSE is organizing an technical seminar for 2nd Year Students by Prof.A M Padma Reddy,SVIT.
Date : 29th Sept 2016 and 3rd October 2016
About the Programme:
The event started with the formal Inaugural function at 1.00 p.m in CSE Seminar Hall. Dr. Balakrishna R, Principal RRCE, Prof Prabhakar M, Vice Principal RRCE, Dr Usha Saktivel, HoD CSE, Prof. A M Padma Reddy, Prof and Dean Student Affairs, SVIT, Bengaluru were present on the dias. The function started with Invocation Song, followed by the welcome speech given by Prof. Sreenivasa B R. Assistant Professor, CSE Dept., and Speaker introduction given by Bharath J Assistant Professor, CSE Dept., and Vote of thanks given by the Prof. Sweetha, Assistant Professor, CSE Dept., followed by tea.
Organizing Secretary: Dr. L SwarnaJyothi, HOD, Dept of ECE, RRCE
Mentors:
Ms. Renuka , Administrative Office, RRCE
Prof. V Sreepathi, Dept of ECE, RRCE
Prof. Sunitha R, Dept of ECE, RRCE
Prof. Aruna S, Dept of ECE, RRCE
Prof. Jyothi A P, Dept of ECE, RRCE
Prof. M Satya Sreenivas, Dept of ECE, RRCE
Ms. Chaithra C M, Instructor, Dept of ECE, RRCE
Mr. Ramesh M, Instructor, Dept of ECE, RRCE
Mr. Sreenivas K R, Instructor, Dept of ECE, RRCE
Mr. Shiva Prakash S V, Instructor, Dept of CSE, RRCE
Mr. Punith Kumar S, System Admin, Dept of CSE, RRCE
Venue: Department of ECE, RRCE, Bengaluru.
Mode of Event: Intra College level
No. of participants enrolled: 15
Target Participants: Group D Workers of RRCE who have attended school middle level or higher level.
Objective of the Workshop: It is to teach the participants to make the documentation in Kannada without any mistake using Baraha software.
Outcome of the event: The participant who had no knowledge of using computers have been trained to prepare documents in Kannada and the workshop enabled them to prepare letters for any communication with different people and for different purposes.
Workshop on – Kannada Kalike Karyagara
Workshop on – Kannada Kalike Karyagara
Event Duration: 18th July 2016.
Organizing Secretary: Dr. L SwarnaJyothi, HOD, Dept of ECE, RRCE
Mentors:
Prof. S M Vijaya, Dept of ECE, RRCE
Prof. P Bhuvaneswari, Dept of ECE, RRCE
Prof. Saroja Malarabhavi, Dept of ECE, RRCE
Prof. Pushpa M J, Dept of ECE, RRCE
Prof. Vani S Badiger, Dept of ECE, RRCE
Prof. Lokesha K, Dept of ECE, RRCE
Prof. Harish N J, Dept of ECE, RRCE
Prof. Ajay M, Dept of ECE, RRCE
Venue: Department of ECE, RRCE, Bengaluru.
Mode of Event: Intra College level
No. of participants enrolled: 28 Target Participants: Group D Workers of RRCE who have either studied 1 or 2 years of their schooling or not attended any school.
Objective of the Workshop: It is to teach them to learn Kannada Alphabets, write and recognize their personal and basic information related to them. The workshop has enabled them to learn all Alphabets of Kannada, read and write Kannada fluently.
Outcome of the event:
The participants have successfully learned to write personal information and names close to them.
They have gained the confidence to read and write Kannada documents.
The Examinations Scheduled on 07/07/2016 are Rescheduled
The Examinations Scheduled on 07/07/2016 are Rescheduled
Celebration of International Yoga day
Celebration of International Yoga day
On the event of International Yoga day, Yoga Club conducted Yoga Day on 24/06/2016 at ‘Abdul Kalam’ Conference hall, RRCE. Programme started with a welcome speech by Prof. Preethi A Nayak, Yoga Coordinator inviting International Yoga Champion Smt. Sowbhagya as a Chief Guest, Founder and Yoga Guru of Sowbhagya yoga kendra trust, Chennapatna. The Said Programme was attended students and Faculty members. Students and faculties practically experienced with Yogasahanas and Pranayamas. During the programme the speaker delivered the importance and benefits of various asahanas along with demo by other two expertises.
While on the subject Various Asanas like Tadasana, AdrdaChakrasana, Padma Hastasana, Trikonasana, PrasaritaPadottanasana, ParivarttaTrikonasana, Vrikshasana, Bhujangasana, Makarasana, Dhanurasana, Sarvangasana, Chakrasana. Pranayama Like Basthika Pranayama, Kapalabathi, Bhramari Pranayama,Omkara Meditation along with Surya Namaskara etc., and its various benefits like to increase our concentration, Memory, brain power, to heal all mental and psychological disorders like anger, stress, anxiety, or even depression ourself, helps to dissolve the extra fat boosting metabolism and controls obesity, quickness digestion, Improves body strength, reduces stress and tension, Cholesterol level control through various ashanas importance were explained. The group have personally showed the mistake & guided the audience.
Finally the Chief Guest Mrs. Sowbhagya concluded the programme by practically doing the Pranayama to all audience and also advised and shown interest to conduct yoga classes twice or thrice in a week. Finally Programme came to end by vote of thanks. Moreover this Programme was very Interesting & more Informative to faculty and Students.
Yoga Club Head and Members are:
Chief Patrons:Sri A.C Shanmugam – Chairman, RR Group of Institutions
Sri A.C.S Arun Kumar – Vice Chairman, RR Group of Institutions Patrons:
Sri. Vijayanand S – Executive Director, RR Group of Institutions
Sri. T.N Sitharam- CEO, RR Group of Institutions
Sri S Jayabalan – Special officer, RR Group of Institutions
Dr. Gopalakrishna Nair- Rector, RR Group of Institutions Chairman:
Dr. R Balakrishna – Principal, RajaRajeswari College of Engineering
Prof. M Prabhakar – Vice Principal, RajaRajeswari College of Engineering Convener:
Prof. Preethi A Nayak – Asst. Prof/Law Officer, RRCE
Faculty Development Programme on Bridging Gap to CBCS VTU system
Faculty Development Programme on Bridging Gap to CBCS VTU system
Date : 6th to 10th June 2016
Organized By: Department of ECE
Venue : Seminar Hall, Dept of ECE,RRCE, Bengaluru
FDP objective :
The FDP is to make faculties of Electronic & Communication Engineering to adopt to CBCS Scheme. There are subjects relevant to Computer Science & Engineering many of the ECE faculties are not comfortable in teaching Computer Science subjects which are Electives as per CBCS Scheme. FDP is an honest effort in presenting the subjects in a concise way by Industry / academic experts in the subjects.
Total number of participants : 40
FDP Outcomes :
40 faculty members of different departments have attended FDP and taken benefit.
Family of ECE is now familiar with the elective subjects attended in CBCS VTU systems of for upcoming semester.
In addition to knowing the subject faculty of ECE and other department like CSE,ISE hare also received the tips for effective teaching
Some speakers have also demonstrated the pedagogy of teaching and learning which is most important for NBA accreditation and outcome based education.
Hands on sessions were part of all lecturers.
A lab session for “Microcontroller MSP 430” was well received by faculties of all departments.
Event Duration : 14th June 2016 to 18th June 2016 (5 Days)
Venue : Henry Ford Seminar Hall (Mechanical Engineering Department)
Invitation For : All Faculty Members and Technical staffs
Target Participants : All Mechanical Engineering Faculty Members and Technical Staffs
Outcome of the program/workshop :
The Mechanical Engineering Department conducted 5 Days Faculty Development Program from 14th to 18th June 2016 at Henry Ford Seminar Hall on various Research oriented topics and also had hands on experience in the Practical Sessions as well as LATEX Software which were very resourceful for all the Mechanical Engineering Faculties as well as Technical staff Members.
Report Of National Level Technical; Symposium TRIGGER 2K16
The event started with the formal Inaugural function at 9.00a.m in CSE Seminar Hall. Dr Gopalakrishnan Nair, Rector, RRCE, Dr Balakrishna R, Principal RRCE, Prof Prabhakar M, Vice Principal RRCE, Dr Usha Saktivel, HoD CSE and Prof Sreenivasa B R, Symposium Coordinator were present on the dias. The function started with Invocation Song, followed by the welcome speech given by Krithika D of 5th sem. Association report was given by HoD of CSE, followed by presidential address given by Rector, Principal and Vice Principal. Vote of thanks given by the Aakash Manneri of 5th followed by tea.
All technical and non technical events conducted in 5th floor of CSE department in various rooms. Students from 14 different colleges like UVCE,Dr.AIT,Amrutha,RRMCH,JVIT,AIT,RNSIT,ACSCE,VKIT,DBIT,GAT,SVVIT,
SIET,SSIT, and from different departments of RRCE participated. We have around 700 students registered for different events and in particularly we have 8 students in Paper Presentation, 41 teams for Technical Quiz, 28 teams for General Quiz, 51 teams for Adreline Rush, 300 students for Gaming, 29students for Debugging. All events were completed by 4.30pm with the winners list. Lunch was provided for all participants, co-coordinators and faculties.
Valedictory function started at 4.30pm with Prof S Usha ,HOD,CSE Dept and all faculties of CSE. Students from different colleges shared their experience about TRIGGER 2K16 followed by Prize Distribution for winner’s. We gave the cash prize of 1000 for 1st prize and 500 for 2nd prize for technical events and electronic gadgets for non technical events. The function was finally ended by thanking management, Principal, HoD, Faculties, Non teaching staff and all student coordinators who worked for this event to make this event a grand success.
National Conference – Recent Technologies in Computer Engineering
National Conference – Recent Technologies in Computer Engineering
CSE Organizing National Conference on “Recent Technologies in Computer Engineering” (NCRTCE-16) on 22 & 23 September 2016.
Date’s of the Conference: 22nd , 23rd Sep-2016
Venue of the Conference: Dr A P J Abdul Kalam Hall, RRCE
Objectives of the Conference : The main objectives of National Conference is to provide researchers, academicians, practicing engineers, and industry leaders from all over India to share high quality information on common platform and also to provide new idea store search and to deal with the use of new techniques, methodology, design and its development to different computing platforms.
Keynote speaker of Conference: Dr. T R Gopalakrishnan Nair
Rector, RR Group of Institutions
No. of papers received: 75 papers
No. of papers accepted: 43 papers
Name of publishing Journal: International Journal of Advances in Science
and Technology.
No. of participant’s: Around 45
No. of Sessions held:4 sessions
About conference flow:
Conference started with the inauguration on 22nd Sep-2016, with all the dignitaries and the keynote speaker. Keynote address was delivered on “Internet Computing”, which was followed by tea break, we started with the sessions according to schedule.
The second day of the conference on 23rd Sep 2016 started with the sessions followed by Valedictory, in which the Best paper awards and certificates for participants were distributed.
Target audience : CSE Dept students(II,III and IV year)
Number of Projects : 15 Projects
Outcome of Event:
A Mini project expo was organized by the Dept of CSE which gave an opportunity for the students to exhibit their creativity, which was co-ordinated by the CSE Department. GPS Locator and Surveillance Robot was the highlight of the expo. Expeditious exhibit project charts, embedded based models of digital water supply, automatic toll payment. The methods like sensor & solar power were also included in the expo. Power point presentation highlighted the information regarding several sectors in implementation. “MINI PROJECT EXPO-2k16” was an informative and a grant successful.
Times has carried out an extensive survey of the engineering institutes in India and has churned out a list of the top 150 colleges based on the three major modules of study viz. Desk Research, Factual Survey and Perpetual Rating Survey.
Dr. R. BalaKrishna (Supervisor), Sneha B, Gayathri A (8th Semester Students) – Identification of Diabetics using Piezoelectric sensor; VGST – Technology Related Innovative Projects (TRIP) Year 2016 (ongoing). Grant: Rs 40000.00 /-
Mr.Nandish U.G (Supervisor), Amith A.Rajolkar, Vinay Kumar B S, Prajwal A C (8th Semester students) – Using Android Phones in Electoral and Voter Registration Campaigns; KSCST, Year 2016 (ongoing). Grant: Rs 3000.00 /-
Higher studies in India & Abroad and a Session on Quick Maths
Higher studies in India & Abroad and a Session on Quick Maths
Resource Person : Krishna Pratap Singh, Faculty T.I.M.E.
Event Duration : 1.30pm – 4.00pm on 20th April 2016.
Venue : Satyendra Nath Bose Seminar Hall, Department of ECE, RRCE, Bengaluru.
Mode of Event : Intra College level
No. of Students enrolled : 30
Target Participants : Final year and pre-final year students of ECE are invited to participate.
Outcome of the event :
Many students of final year and pre-final year students have shown interest in pursuing higher studies in India & abroad. They extracted the information about category of institutions, Fee structure and funded projects and eligibility criteria through their questionnaire.
The resource person gave them sufficient information and web link through which they can read further about higher studies in different countries and in India and job opportunities after their studies.
The students have interactively participated and enjoyed doing a session on Quick Maths.
One Day Technical Seminar on Fixtures for Productivity
One Day Technical Seminar on Fixtures for Productivity
Resource Person : Mr.Rama Prakash Holla,Managing Director
Distinct Productivity Solutions,Bengaluru-560074
Event Duration : 10.45 AM to 12.45 PM
Awards/ Achievements : Mr. Rama Prakash Holla has about 21 years of overall experience in Manufacturing industry.His areas of expertise are CNC machines, Jigs and Fixtures, Robotics and Automation, Toyota Production system and Lean Manufacturing. He is passionate about imparting knowledge of CNC in the grass-root levels in the Indian youth
Venue : Civil seminar Hall
Invitation For : All Mechanical Engineering Students
Target Participants : UG/ students of all related Engineering fields are invited to participate.
Outcome of the program/workshop :
Mechanical department of RRCE conducted technical seminar on 22nd April 2016 at our Civil seminar hall. Mr.Rama Prakash Holla explained to the students the importance of tooling in manufacturing and fixture design principles for productivity improvement.
Dept of EEE is organizing Two Days Symposium TESLA-2K16 on 26,27 April 2016
Event Duration : 26/4/2016 – 27/04/2016
Venue : Dr Abdul Kalam conference hall and EEE Seminar Hall
Total number of Participants: 300 Students
Target Participants: Inter college competition
Outcome of the program/workshop: we conducted 12 events. Events are as follows :
PAPER PRESENTATION
We received 12 papers 4 from SJBIT and VKIT other 8 papers were from Parent College. The judges were Dr. Swarna Jyoti, Prof and Head, ECE Dept, Dr Arunachalam M, Prof and head, EEE Dept and Prof K.LShivalingaiah Assoc Prof , EEE Dept was organized in Dr Abdul Kalam conference hall .
Techno Mindstrom
Techno Mind storm event was conducted on 1st day of “Symposium” i.e., 26- 4-2016 at 11:30 am in room 120.Event was conducted in 3 different rounds.
MINI PROJECT
The 11 teams participated in the competition. 1 from VKIT and RVCE and 9 were from Parent College. The judges were Prof Sunitha R and Prof Vani S ECE Dept .
Target Participants : 2nd year (4th semester students ) of Civil Department
Outcome of industrial visit :
Students were practically able to witness the actual operations involved in a Quarry Site
They were able to study all the operations and the machineries required for crushing of the stones to at a Quarry Site for different Construction purposes
Students had a hands on experience of the grading and mixing of concrete at a concrete mixer plant.
They were exposed to all the operations of the equipments in a concrete mixer plant.
Technical Activities for Civil Engineering Students on 2nd April 2016.
Event Duration : 9.30 am to 1 p.m
Venue : Civil Department ,RRCE
No. of Students participated : 80
Target Participants : UG students of civil Engineering department were invited to participate
Outcome of the program/workshop :
Students created the best of waste models like bridge , Gobar gas plants ,windmill and decorative items. They participated in quick levelling activity to showcase their accuracy and precision in surveying. They explored the utility of sticks to create bridge models and cards for card structures. The best among them was awarded.
Two days workshop on Civil Engineering AUTOCAD on 30th and 31st 2016 for 4th Semester Students.
Resource Person : Mr. Rajaram B N
Mr. Sunil R
From CADD Centre, Kengeri
Awards/ Achievements : Certificate For Active Participant’s From CADD Centre
Event Duration : Two Days ( 30th & 31st March 2016 )
Venue : Arya Bhata Seminar Hall, RRCE
Invitation For : Principal, Rector, HOD-Civil, CADD Centre
Target Participants : 4th semester UG students of Civil Engineering fields are invited to participate
Outcome of the program/workshop : Main objective of this workshop is to get hands on basics of AUTO CADD which consists of one day theory classes on commands and followed by computer practice which helps students to better understand AUTO CADD for their future semester.
CSE organising Workshop on “GATE Exam Presentation” on 29-03-2016
CSE organising Workshop on “GATE Exam Presentation” on 29-03-2016
Resource Persons: Mr Durai Kannan and Team
Timings: 11.00 am to 1.00 pm
Venue : CSE Seminar Hall
Event Duration : 2 hours
Target Participants : UG 6th and 4th semester students of CSE department
Outcome of the program/workshop: : The outcome of the Guidance on Higher Education classes is to create awareness and encourages students who aspire to continue higher education in India or abroad after their graduation.
Technical Seminar in Application of Thermal Engineering
Technical Seminar in Application of Thermal Engineering
Resource Person : A.Raghunandan, Professor, Dept. of ME,Oxford college, Bangalore
Awards/ Achievements : 38 Year Experience in Thermal Engineering
Event Duration : 10.45 to 12.45 pm
Venue : Aryabhata seminar Hall
Invitation For : All Mechanical Student
Target Participants : UG/ students of all related Engineering fields are invited to participate
Outcome of the program/workshop :
Mechanical department of RRCE conducted technical talk on 4th April at our Aryabhata seminar hall Prof. Raghunandan was given lecturer on “ Application of Thermodynamics ” ,The Rector, Principal, HoD, all faculties & all mechanical students are present in the technical seminar
Department of CSE is organizing National level Convention “Samshodhan16” on 02-04-2016
Event Duration : One day, 2nd April 2016
Venue : Department of CSE, RRCE, Bengaluru
Mode of Event : Inter College level
Target Participants : UG/PG students of all related Engineering fields are invited to participate.
Outcome of the symposium :
Participants presented posters related to global warming, swach bharath etc.
Coding is related to programming in C, C++ as many as students have participated in this event. The Participants successfully executed given problem statement in corresponding code.
In idea presentation was done by different groups of different colleges. The different innovative ideas were presented by different groups. This event has created a common platform to present the work done in academic institution of high standard.
Six Non-Technical events are conducted to promote group activities and to promote inter-team communication.
Department of CSE is organising a seminar on Internet Of Things And its trends on 28-3-2016 by Preva Systems.
Resource Person : Mr.Ramraj, CEO, Preva Systems
Mr.Nithin, Customer Solution lead, Preva Systems
Event Duration : 2 hours
Venue : CSE Seminar Hall
Target Participants : UG 6th and 8th semester students of CSE department.
Outcome of the program/workshop : The outcome of the Technical Seminar is to highlight the emerging importance of IoT and aims at providing the knowledge, tools and technologies of Internet of things
Karnataka State Council for Science and Technology (KSCST), Indian Institute of Science, Bangalore (Government of Karnataka) sponsored Final Year Projects at RRCE for the Academic Year 2015-16, under Students Project Proposal-SPP: 39th series.
Outcome of the program/visit: Students gained the knowledge and able to understand the following
with shop supervisors and workers:
Products of the company
Company Organization structure
Maintenance & repair services
Latest machinery set up, Paint Shop, R & D Wing with Computer Aided Design facility and testing Equipments. Latest CNC machining centers ensure precision manufacturing and seamless assembly
The event was very helpful to the UG students to learn and to have hands on PLC and SCADA technology. They learned how to atomize the system using PLC programing and to design the same in SCADA. Student shared their expertise by doing small project using the software, they were also happy to take up their project in PLC and SCADA and implement new ideas on automation.
Resource Person: Parthasarathy and Thiagaraj, Training and QA dept.
Event Duration: One day
Venue: ITI Limited, Dooravaninagar, Bangalore-560016
Target Participants: 2nd year UG students.
Outcome of the Program:
Gained Practical Knowledge of assembling the components in PC cards.
To differentiate between normal and Defense telephone Systems.
Gained knowledge about PC board manufacturing process.
How to use Programming in Automated Drilling process.
“INDIAN SOCIETY OF MECHANICAL ENGINEERS” on 18-02-16
“INDIAN SOCIETY OF MECHANICAL ENGINEERS” on 18-02-16
Department of Mechanical Engineering Cordially invites all for the Inaugural Function of STUDENT CHAPTER “INDIAN SOCIETY OF MECHANICAL ENGINEERS” on 18-02-16.
Computer Science and Engineering department association “Aurora Technocrats” has organized workshop on “IBM Bluemix and TGMC” on 08/02/2016.
This function aimed at providing a platform for students to develop a project and to explore & inspire them towards excellence in Computer Science and Technology.
The function started at 10.00am. This occasion was graced by the Technical Speaker of the Function Mr.Waseem Ahmed, Program Manager, IBM India and Dr. S. Usha, HOD, CSE.
The event was conducted for all CSE students and served for more than 150 students.
Mr. Waseem Ahmed delivered a technical talk on “IBM Bluemix and TGMC”, IBM Bluemix is a cloud platform as a service (PaaS) developed by IBM. It supports several programming languages and to build, run, deploy and manage applications on the cloud.
The objective behind TGMC(The Great Mind Challenge) is to encourage students who aspire to make key contributions, to develop applications on cutting-edge IBM technologies while providing them with an opportunity to improve their software-writing skills.
We thank the management for their constant and continuous encouragement, Principal for providing valuable directions and support in time.
SAMANVAYA-16
SAMANVAYA-16
Alumni Meet Proceedings Held on 26.01.2016
The fifth Annual Alumni meet “SAMANVAYA-16” of RRCE Alumni Association was held at RajaRajeswari College of Engineering conference hall, on 26th JAN 2016. Alumni Association Coordinator Prof.Bhuvaneshwari invited all the alumni’s and deligates for the meet.
As dignitaries Dr. Balakrishna, Principal RRCE, Mr. Rahul, Alumni association member, HOD’s of all departments had participated and shared their views in the meet.
Few Alumni’s spoke and expressed that they felt proud about seeing the growth of RRCE in academics infrastructure and placement they also requested for more knowledge on practical concepts which they promised to join their hands with college through alumni association for betterment of the students.
The third edition of newsletter in the name of SAMANVAYA-16 was released by the dignitaries. Alumni association election was conducted to select PRESIDENT and MR. MADHU K N was selected for the post rest for the post of Vice President, Secretary, Joint Secretary, and Treasurer Mr. Parveen. M K, Samantha Kumar N, Akshar. K V, Pavan Kumar K R was selected respectively. Lavish Lunch was arranged for all the alumni’s participated.
Prof. Pavan Kumar KR
Head, Alumni
association RRCE
Department of Mechanical Engineering, Rajarajeswari College of Engineering (RRCE), organized one day International Workshop on “Nanostructured, Smart and Electronic Materials (IWNSE-2016)” on Friday 8th January-2016.
More than 100 participants attended the workshop including academicians, research scholars, and faculty staffs, scientists, practicing engineers from industries, R&D personnel and PG/UG students from various colleges. The main focus of the workshop was to provide a forum for the presentation and discussion of research on the functional and mechanical properties of all materials which are of interest to material scientists and engineers from many different areas including R&D. The topics included, technical talks on the fabrication and characterization techniques of nano-structured materials, smart materials, micro and nano fabrication techniques of electronic materials and their key potential technologically significant applications.
International workshop was presided by the chief guest Dr. Ajay Kumar Kambham, Ph.D (imec-Belgium), along with Dr. T. R. Gopalakrishnan Nair, Rector (RRGI), Dr. R. Balakrishna, Principal (RRCE), Dr. R. Shankara Reddy, HOD (Dept. of Mech. Engg., RRCE) and Dr. S. Anand Kumar, Professor (Dept. of Mech. Engg., RRCE) and Organizing Secretary of IWNSE-2016. Dr. Ajay Kumar Kambham is a Senior Engineer at Global Foundries, Malta, USA, who is an expert in semiconductor materials and its characterization as well as one among the resource person of the workshop. The key note address was delivered by Dr. T. R. Gopalakrishnan Nair, Rector, Rajarajeswari Group of Institutions, who is a former ISRO Senior Scientist (Retd,), who had worked on various projects which is of national importance. Key note lecture was delivered on the topic titled “Changing Paradigms of Semiconductor Technology & Computing Challenges”.
The brainstorming technical sessions were the key highlights of this international workshop. The workshop was overwhelmed with enthusiastic participation from different domain of technical fraternity. The technical talks were delivered by the other resource persons, Dr. T. N. Raju, Ph.D (IIT-Madras), Department of Mechanical Engineering, Ambedkar Institute of Technology, Bangalore and Dr. S. Anand Kumar, Ph.D (IIT-Madras), Department of Mechanical Engineering, Rajarajeswari College of engineering, Bangalore were enriching and embellishing factors of the workshop.
RajaRajeswari College of Engineering encourages students to participate in different activities. It provides an opportunity for students to develop their interactions among groups and helps in enhancing their creative ideas.
