Publication

Publications of Dr. N Sreenivasalu Reddy

International Journal

    1. N. Sreenivasalu Reddy, K Rajagopal, and P H Veena, “Experimental investigation on heat transfer enhancement and pressure drop of double pipe heat exchanger in solar water heating system”, International Conference on Sustainable Engineering and Technology (iConset 2018) AIP Conf. Proc. 2039, 020035-1–020035-10; https://doi.org/10.1063/1.5078994, Published by AIP Publishing, 978-0-7354-1765-6. Scopus index, Impact factor: 0.43.

    2. N. Sreenivasalu Reddy, K Rajagopal, and P H Veena, “Experimental Investigation of Heat Transfer Enhancement of a Double Pipe Heat Exchanger with Helical Fins in the Annulus Side”, International Journal of Dynamics of Fluids, volume 13, Number 2 (2017), pp. 285-293,ISSN : 0973-1784.

    3. N. Sreenivasalu Reddy, K Rajagopal, and P H Veena, ” Comparison study of longitudinal Rectangular and helical fins in the annulus side of double pipe heat exchanger”, Trends in mechanical Engineering and technology, volume 7, Issue 3, PP 1-7, (2017), pp. 285-293,ISSN : 2231-1793 ( online) 2347-9965 ( print).

    4. N. Sreenivasalu Reddy, K Rajagopal, and P H Veena, “Numerical Investigation of Heat Transfer Enhancement and pressure drop of a Double Pipe Heat Exchanger with Rectangular Fins in the Annulus Side”, International Journal of Dynamics of Fluids, volume 13, Number 2 (2017), pp. 295-308,ISSN : 0973-1784.

    5. N. Sreenivasalu Reddy, K. Rajagopal, P.H Veena and V.K Pravin, A Momentum Interpolation Method for Laminar Incompressible flows, International Journal of Research, Volume 1, Number 7 (2014), pp. 327- 332. Impact factor: 7.296.

    6. Anjan H, N.SreenivasaluReddy,Kanchiraya, Pressure Based Method for Solving Viscous Incompressible Flows using Rhie and Chow Interpolation, International Journal of Engineering Research, Volume 3, Number 3 (2014), pp. 2347-5013. Impact factor: 1.0142

    7. Sachin K M, Vinay S S, N.SreenivasaluReddy, Comparison of pressure based solver with artificial compressibility method, International Journal of Engineering Research, Volume 3, Number 7 (2014), pp. 2347-5013, Impact factor: 1.0142.

    8. Kailash1, S. Gowreesh, N. Sreenivasalu Reddy, Optimization of Heat Transfer and Pressure Drop of A Plate Fin-Tube Heat Exchanger Using CFD, International Journal of Engineering Studies, Volume 5, Number 1 (2013), pp. 55-71.

    9. N. Sreenivasalu Reddy, K. Rajagopal, P.H Veena and V.K Pravin, A two dimensional pressure-based solver for incompressible/compressible flows, International Journal of Computational Physical Sciences, Volume 4, Number 1 (2013), pp. 1-6.

    10. N. Sreenivasalu Reddy, K. Rajagopal, P.H Veena and V.K Pravin, A pressure based solver for an incompressible laminar Newtonian fluids, International Journal of Fluids Engineering, Volume 5, Number 1 (2013), pp. 397- 402.

    11. Kailash, S. Gowreeshand N. Sreenivasalu Reddy, Optimization of heat transfer and pressure drop of a plate fin-tube heat exchanger using CFD , International Journal of Engineering Studies, Volume 5, Number 1 (2013), pp. 55-71.

    12. N. Sreenivasalu Reddy, K. Rajagopal, P.H Veena and V.K Pravin, Comparison of interpolation schemes for incompressible flows, International Journal of Fluids Engineering, Volume 3, Number 4 (2011), pp. 397- 402.

    13. S. Gowreesh, N. Sreenivasalu Reddy and N.V. Murthy, Convective heat transfer analysis of an aero gas turbine blade using commercial codes, International Journal of Mechanics and Solids, Volume 4, Number 1 (2009), pp. 55-62.

    14. S.G. Sangashetty, NSreenivasalu Reddy, R Shankar Reddy and Baghyashekar, Material Optimization of Diesel Engine Piston, 2ndNational conference on Innovation in Mechanical Engineering, (2014), pp 24-28.

    15. N Sreenivasalu Reddy, K. Rajagopal and P.H Veena, A Comparision of Discretisation Schemes for Convection-Diffusion Equation, 2ndNational conference on Innovation in Mechanical Engineering, (2014), pp 129-132.

    16. Experimental Investigation of Parabolic trough collector absorber tube for tapping Solar Energy, Funded by KSCST, IIsc, Bengaluru, 2015-16.

    17. Experimental Investigation of a Single Cylinder Four Stroke Diesel Engine using Vegetables oil of Different Proportions with Diesel, Funded by KSCST, IIsc, Bengaluru, 2016-17.

    18. Experimental Investigation of Receiver Tube of solar Parabolic Trough Collector with Twisted Tape inserts, Funded by KSCST, IIsc, Bengaluru, 2016-17.

    19. Design and fabrication of dual purpose refrigerator for agriculture, Funded by KSCST, IIsc, Bengaluru, 2017-18.

    20. Experimental study of heat transfer on receiver tube of parabolic collector with continuous helical fins, Funded by KSCST, IIsc, Bengaluru, 2017-18.

    21. Experimental Investigation of Preheated Neem oil Bio Diesel in Diesel Engine, Funded by KSCST, IIsc, Bengaluru, 2018-19.

    22. Experimental study of heat transfer on a rotating receiver tube of parabolic trough collector, Funded by KSCST, IIsc, Bengaluru, 2018-19.

    23. Improvement in liquefied petroleum gas (LPG) cooking stove, Funded by KSCST, IIsc, Bengaluru, 2018-19.

    24. Design and fabrication of gobar gas based refrigerator system, Funded by KSCST, IIsc, Bengaluru, 2018-19.

    25. Conversion of biodegradable waste into composite, Funded by KSCST, IIsc, Bengaluru, 2018-19.

National Conference

  1. N Sreenivasalu Reddy, Dr. S.G. sangashetty,, R Shankar Reddy and Baghyashekar, Material Optimization of Diesel Engine Piston, 2ndNational conference on Innovation in Mechanical Engineering, (2014), pp 24-28.

  2. N Sreenivasalu Reddy, K. Rajagopal and P.H Veena, A Comparision of Discretisation Schemes for Convection-Diffusion Equation, 2ndNational conference on Innovation in Mechanical Engineering, (2014), pp 129-132.

  3. N Sreenivasalu Reddy, Dr.S.G.Sangashetty, LakshimikantGurumurthy, Dr.M.Bhagyashekhar “Perfomance analysis of shell and tube Heat exchanger” published at National Conference on ERAME 2015 Reva University